LiquidElast LiquidElast® is a universal, elastic and pressure waterproof sealant for surfaces as well as for joints in the entire construction area against pressing water. The one-component sealant can be used indoors and outdoors. LiquidElast® is used as a surface, composite or joint sealant. After curing, FlächenElast® forms a "rubber-like" waterproof membrane to protect building components behind it. The flexibility of FlächenElast® allows crack bridging of up to 5 mm after curing. FlächenElast® can be applied to dry and matt-moist concrete surfaces from 0 °C component temperature (ice-free surface) and reliably seals up to a maximum water immersion depth of 10 m. You can watch the application of FlächenElast® Type S in the product video . Advantages of the LiquidElast® Pressure waterproof up to 1.0 bar Applicable on damp substrates from 0°C Crack-bridging up to 5 mm Permanently elastic LiquidElast® Type S (paintable) is painted onto the substrate, whereas the liquid LiquidElast® Type V (castable) is poured onto horizontal surfaces or joints. Wherever an individual, flexible sealing membrane adapted to the structure is required as a two-dimensional barrier even in the case of water under pressure, the FlächenElast® is the simplest solution. Fields of application of the LiquidElast® Type S Residential and commercial construction, also in cold climates In the area of structures in contact with the ground Cellar and floors Pressurized waterproofing Fields of application of the LiquidElast® Typ V Residential and commercial construction, also in cold climates In the area of structures in contact with the ground Cellar and floors Pressurized waterproofing for horizontal surfaces and joints Technical properties and variants of LiquidElast® Art.-Nr. Product Description Info 5004143 LiquidElast® Typ S, 7 kg tubular bag Sealant and adhesive with special polymer Color: gray, paintable 5004153 LiquidElast® Typ S, 1 kg tubular bag Sealant and adhesive with special polymer Color: gray, paintable 5004144 LiquidElast® Typ V, 7 kg tubular bag Sealant and adhesive with special polymer Color: gray, self-leveling for surfaces and joints 5004146 LiquidElast® Typ V, 1 kg tubular bag Sealant and adhesive with special polymer Color: gray, self-leveling for surfaces and joints 5004149 LiquidElast® Accelerator 420g bottle For curing independent of humidity, for example in deep joints 5004235 LiquidElast® fleece 50 m² / roll For insertion into the LiquidElast® for high loads
Content: 50 Square meter
Hand squeeze gun The professional hand squeeze gun is made of a sturdy aluminum-steel housing. The good workmanship ensures a reliable and even flow of material. Application instructions using the example of InnoElast® The substrate must be grease-free, clean and load-bearing. The substrate may be damp, an adhesive primer is usually not required. Apply backfill material (prevents 3- flank adhesion, saves material). Joints should be sufficiently thick or wide >10 mm, maximum width is 5 cm. InnoElast® is supplied in 600 ml tubular bags and is filled evenly into the joint using a tubular bag gun. Pull off the sealant smoothly and allow to cure. The curing time depends on the temperature and humidity. Attention!!! If release agents are used, they must not be water-based.
Metal waterstops Product properties and variants of metal waterstops Art.-Nr. Article description Article information Selling price 5004252 Metal waterstop KB * Height: 160 mm, Length: 2000 mm completely coated 100 m per on request 5004250 Retaining bracket M-shape for KB metal waterstop - on request 5004129 KB omega bracket - on request* other versions on request
ProElast®-System The reliable ProElast® system is an exterior waterproofing system for construction joints and predetermined crack cross-sections that withstands high water pressure. The tested ProElast® system is an easy-to-apply, 2-part waterproofing system. It consists of the resistant ProElast® EPDM film and the high-adhesion InnoElast® adhesives and sealants. The ProElast® system is an exterior, strip-shaped sealing of construction and predetermined crack joints. In addition to its high watertightness, the system is characterized by high UV and weathering resistance. The ProElast® system benefits from the unique adhesion and processing properties of InnoElast®. For example, the system can be applied from as low as -3 ºC component temperature and on matt-moist substrates.. Benefits Pressure waterproof up to 2 bar Application on damp surfaces or ice-free substrate from -3°C Weather and UV resistant InnoElast type 2 = high chemical resistance Applicable without primer Common applications are the subsequent sealing of component joints, cracks and crevices in cellars, shafts, tanks, walls, plinths, but also roofs. You can watch the application of the ProElast® system in the product video. Applications Working and predetermined crack joints in WU concrete construction Joint, crack and crevice sealing in new construction and renovation projects For shafts, tanks, cellars, underground garages, roofs, balconies In civil engineering, sewerage (waste water), agricultural construction* *No approval according to AwSV Technical features and variations of the ProElast® system Art.-Nr. Article description Article information 5004050 ProElast® 1.0 b= 200 mm * Special EPDM sealing film L=25 m 5004112 ProElast® 1.0 b= 300 mm * Special EPDM sealing film L=25 m 5004128 ProElast® 1.0 b= 400 mm * Special EPDM sealing film L=25 m 5004117 ProElast® 1.0 b= 500 mm * Special EPDM sealing film L=25 m 5009064 Toothed trowel 180 mm with B3 teeth - 7003069 Pressure roller approx. 5 cm wide - Our ProElast® system consists of the two components ProElast® film and InnoElast®.
Metal waterstops Product properties and variants of metal waterstops Art.-Nr. Article description Article information Selling price 5004252 Metal waterstop KB * Height: 160 mm, Length: 2000 mm completely coated 100 m per on request 5004250 Retaining bracket M-shape for KB metal waterstop - on request 5004129 KB omega bracket - on request* other versions on request