BT- shuttering magnetic box The TS magnetic box for stair formwork allows the formlining to be attached directly to the box. The TS magnet box enables optimal and flexible shuttering when assembling stair formwork. The fixing of different formwork boards to the magnet is possible at any time without any problems by means of simple screw connections. The formwork height is thus variable and can be regularly adjusted by the customer. The magnet can be moved freely on the steel table until it is easily activated by a knob, making it easy to install. Advantages Simple activation of the magnet via the knob Shuttering height freely selectable due to individual shuttering skin High-quality, robust and fully galvanized holding box made of QST 380 steel High magnetic holding force of 6500 N Areas of application Stairs production Product features and variants of the magnet box Art.-Nr. Description Adhesive force [N] Mass [kg] l [mm] b [mm] h [mm] 8103053 BT-shuttering magnetic box 12.000 7,0 310 120 92 8103073 BT-shuttering magnetic box 18.000 7,3 310 120 92
The BT-Shuttering box TS for stair formwork allows the formlining to be fixed directly to the box. The BT-Shuttering box TS enables optimal and flexible shuttering when assembling stair formwork. The fixing of different formwork boards to the magnet is possible at any time without any problems by means of simple screw connections. The formwork height is thus variable and can be regularly adjusted by the customer. The magnet can be moved freely on the steel table until it is easily activated by a knob, making it easy to install. Advantages Simple activation of the magnet via the knob Formwork height freely selectable due to individual formlining High-quality, robust and fully galvanised holding box made of QST 380 steel High magnetic adhesive force of 6500 N Einsatzgebiete Staircase production
This is a replacement item for our MagFly® AP shuttering magnet. These countersunk screws (2 pieces) are used to fix the foot blocks to the aluminum housing of the MagFly® AP. Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Dowel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90°. Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Threaded pin (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Cylindrical grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
This is a replacement item for our MagFly® AP shuttering magnet. These countersunk screws are used to fix the lever joint of the MagFly® AP. Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Dowel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90°. Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Threaded pin (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Cylindrical grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
This is a replacement item for our MagFly® AP shuttering magnet. The dowel pin 10 x 40 is required for mounting levers in the lever joint (standard version). Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Dowel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90°. Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Threaded pin (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Cylindrical grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
This is a replacement item for our MagFly® AP shuttering magnet. The Dowel pin 10 x 30 for lever joint 90° is required for mounting levers on the lever joint (90° version). Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Dowel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90°. Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Threaded pin (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Cylindrical grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
MagFly® Magnet Type E Electric box magnet, adjustable to different sizes with MagFly® technology. The magnet can be moved on the switch table. The magnet is activated only when pressed firmly and fixes the electrical box in the desired position. The lateral springs are adjustable for the different diameters. Technical properties of the MagFly® magnet type E Art.-Nr. Description Adhesive force [N] d [mm] D [mm] h [mm] 8005114 MagFly® Magnet Type E 0,5 53,5 58,5 29,8
Hand platform truck with 2 magnet racks The hand truck is designed for flexible use. With the two magnet stands, it offers space for the safe and proper storage of 56 MagFly® magnets and their transport.. comprising of: Hand platform truck in welded sectional steel construction, loading area 1,600 x 900 mm, loading height 480 mm, turntable steering with scissor-type drawbar and safety handle, pneumatic tires d 400 x 100, automatic parking brake acting on the front wheels according to EN 1757-3, 2 magnet stands for 28 holding magnets each MagFly® AP or MagFly® with MultiForm adapter, magnet stands rotatable via steel ball casters, secured with spring cotter and individually removable. Technical features of the hand truck incl. 2 magnetic racks Art.-Nr. Description l [mm] b [mm] h [mm] 8008145 Hand platform truck incl. 2 magnetic racks 1.600 900 2.300
The MagFly® AP is a patented shuttering magnet and part of the BT shuttering system. Its holding force to mass ratio is unique, as is the unique foot/spring system that allows the magnet to glide effortlessly over the formwork table. By applying firm pressure from above, the magnet is activated and adheres to the shuttering table through its magnetic force. With the integrated lever, the MagFly® AP can be easily and quickly released and realigned. The MagFly® AP does not require any additional tools or adapters to use it. The ultra-light aluminium housing enables ergonomic working with the magnet and protects the user's strength. In combination with the MultiForm formwork beam and an attached plastic triangular strip, the formwork beam and the triangular strip are pressed firmly onto the formwork table when the magnet is activated, so that subsequent sealing of the edge with silicone is simply not necessary. These effective technologies are perfectly matched to each other and thus considerably accelerate the production of precast concrete parts. You can watch the application of the MagFly® AP in the product video. Advantages Patented hold-down of the formwork, thus high contact pressure of the formwork on the formwork table No silicone necessary for sealing Easy and ergonomic handling due to foot/spring system Magnet perfectly matched to the formwork beam Unbeatable adhesion force to mass ratio Areas of application Shuttering magnet for pallet circulation systems as well as tilting tables Formwork for walls, columns etc. Technical data of the magnet variants Art.-Nr. Description Adhesive force [N] l1 [mm] l2 [mm] b1 [mm] b2 [mm] h1 [mm] h2 [mm] 8101067 MagFly® AP with lever right 22.000 260 407 96 124 65 96 8001075 MagFly® AP with lever left 22.000 260 407 96 124 65 96 8001081 MagFly® AP with lever °90 22.000 260 288 96 207 65 85
This is a replacement item for our MagFly® AP shuttering magnet. The lever is available in 4 variants. Lever for MagFly® AP - straight (in combination with lever joint 90° - 8001067500 or lever joint (standard version) - 8001067003) Lever for MagFly® AP - left (in combination with lever joint (standard version) - 8001067003) Lever for MagFly® AP - right (in combination with lever joint (standard version) - 8001067003) Lever for MagFly® AP - short (Here we shorten the lever - straight. In combination with lever joint 90° - 8001067500 ) Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever in front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Parallel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90° Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Grub screw (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Parallel grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
The MagFly® universal magnet is a real classic. It was the first adhesive magnet ever to be equipped with the patented MagFly® functionality, to which it ultimately owes not only its name but also its success. MagFly® universal magnets are versatile. Two threaded holes M16x1.5 are available as standard for mounting adapters and accessories. Alternative thread positions and sizes are available on request. The different adhesive forces, sizes and designs also ensure that the right holding magnet is available for different applications. MagFly® universal magnets can be used at ambient temperatures of up to 80°C. Special heat-resistant versions are available on request, e.g. for temperatures up to 120°C (type H) or 150°C (type SH). High-quality materials and the torsion-resistant design ensure an extremely long service life. Advantages at a glance Easy handling and exact positioning thanks to integrated MagFly® technology No additional tool required for loosening, the fixed eccentric lever is not only practical, it saves time Multifunctional use thanks to a wide range of accessories and adapters Scalable for a wide range of applications, as different sizes and adhesive forces are available depending on requirements High-quality materials and the torsion-resistant design ensure an extremely long service life Areas of application Multifunctional application possibilities through a wide range of accessories and adapters Suitable for tilt tables and steel pallets Compatible with Multiform and FlyFrame® formwork systems Integrated lever Technical properties of the magnet variants Article number Description Adhesive force (N) Weight (kg) l1 (mm) l2 (mm) b1 (mm) b2 (mm) h1 (mm) h2 (mm) 8001052 MagFly® 1000 k 11.000 5,0 230 270 60 115 50 65 8001055 MagFly® 1600 k 16.000 7,5 230 270 85 140 50 65 8001060 MagFly® 2000 k 22.000 10,0 230 270 110 165 50 65 8001064 MagFly® 2500 k 27.000 12,5 230 270 135 190 50 65 8001065 MagFly® 3000 k 33.000 15,0 230 270 160 215 50 65
The MagFly® universal magnet is a real classic. It was the first adhesive magnet ever to be equipped with the patented MagFly® functionality, to which it ultimately owes not only its name but also its success. MagFly® universal magnets are versatile. Two threaded holes M16x1.5 are available as standard for mounting adapters and accessories. Alternative thread positions and sizes are available on request. The different adhesive forces, sizes and designs also ensure that the right holding magnet is available for different applications. MagFly® universal magnets can be used at ambient temperatures of up to 80°C. Special heat-resistant versions are available on request, e.g. for temperatures up to 120°C (type H) or 150°C (type SH). High-quality materials and the torsion-resistant design ensure an extremely long service life. Advantages at a glance Easy handling and exact positioning thanks to integrated MagFly® technology No additional tool required for loosening, the fixed eccentric lever is not only practical, it saves time Multifunctional use thanks to a wide range of accessories and adapters Scalable for a wide range of applications, as different sizes and adhesive forces are available depending on requirements High-quality materials and the torsion-resistant design ensure an extremely long service life Areas of application Multifunctional application possibilities through a wide range of accessories and adapters Suitable for tilt tables and steel pallets Compatible with Multiform and FlyFrame® formwork systems Integrated lever Technical properties of the magnet variants Article number Description Adhesive force (N) Weight (kg) l1 (mm) l2 (mm) b1 (mm) b2 (mm) h1 (mm) h2 (mm) 8001052 MagFly® 1000 k 11.000 5,0 230 270 60 115 50 65 8001055 MagFly® 1600 k 16.000 7,5 230 270 85 140 50 65 8001060 MagFly® 2000 k 22.000 10,0 230 270 110 165 50 65 8001064 MagFly® 2500 k 27.000 12,5 230 270 135 190 50 65 8001065 MagFly® 3000 k 33.000 15,0 230 270 160 215 50 65
The MagFly® universal magnet is a real classic. It was the first adhesive magnet ever to be equipped with the patented MagFly® functionality, to which it ultimately owes not only its name but also its success. MagFly® universal magnets are versatile. Two threaded holes M16x1.5 are available as standard for mounting adapters and accessories. Alternative thread positions and sizes are available on request. The different adhesive forces, sizes and designs also ensure that the right holding magnet is available for different applications. MagFly® universal magnets can be used at ambient temperatures of up to 80°C. Special heat-resistant versions are available on request, e.g. for temperatures up to 120°C (type H) or 150°C (type SH). High-quality materials and the torsion-resistant design ensure an extremely long service life. Advantages at a glance Easy handling and exact positioning thanks to integrated MagFly® technology No additional tool required for loosening, the fixed eccentric lever is not only practical, it saves time Multifunctional use thanks to a wide range of accessories and adapters Scalable for a wide range of applications, as different sizes and adhesive forces are available depending on requirements High-quality materials and the torsion-resistant design ensure an extremely long service life Areas of application Multifunctional application possibilities through a wide range of accessories and adapters Suitable for tilt tables and steel pallets Compatible with Multiform and FlyFrame® formwork systems Integrated lever Technical properties of the magnet variants Article number Description Adhesive force (N) Weight (kg) l1 (mm) l2 (mm) b1 (mm) b2 (mm) h1 (mm) h2 (mm) 8001052 MagFly® 1000 k 11.000 5,0 230 270 60 115 50 65 8001055 MagFly® 1600 k 16.000 7,5 230 270 85 140 50 65 8001060 MagFly® 2000 k 22.000 10,0 230 270 110 165 50 65 8001064 MagFly® 2500 k 27.000 12,5 230 270 135 190 50 65 8001065 MagFly® 3000 k 33.000 15,0 230 270 160 215 50 65
The MagFly® universal magnet is a real classic. It was the first adhesive magnet ever to be equipped with the patented MagFly® functionality, to which it ultimately owes not only its name but also its success. MagFly® universal magnets are versatile. Two threaded holes M16x1.5 are available as standard for mounting adapters and accessories. Alternative thread positions and sizes are available on request. The different adhesive forces, sizes and designs also ensure that the right holding magnet is available for different applications. MagFly® universal magnets can be used at ambient temperatures of up to 80°C. Special heat-resistant versions are available on request, e.g. for temperatures up to 120°C (type H) or 150°C (type SH). High-quality materials and the torsion-resistant design ensure an extremely long service life. Advantages at a glance Easy handling and exact positioning thanks to integrated MagFly® technology No additional tool required for loosening, the fixed eccentric lever is not only practical, it saves time Multifunctional use thanks to a wide range of accessories and adapters Scalable for a wide range of applications, as different sizes and adhesive forces are available depending on requirements High-quality materials and the torsion-resistant design ensure an extremely long service life Areas of application Multifunctional application possibilities through a wide range of accessories and adapters Suitable for tilt tables and steel pallets Compatible with Multiform and FlyFrame® formwork systems Integrated lever Technical properties of the magnet variants Article number Description Adhesive force (N) Weight (kg) l1 (mm) l2 (mm) b1 (mm) b2 (mm) h1 (mm) h2 (mm) 8001052 MagFly® 1000 k 11.000 5,0 230 270 60 115 50 65 8001055 MagFly® 1600 k 16.000 7,5 230 270 85 140 50 65 8001060 MagFly® 2000 k 22.000 10,0 230 270 110 165 50 65 8001064 MagFly® 2500 k 27.000 12,5 230 270 135 190 50 65 8001065 MagFly® 3000 k 33.000 15,0 230 270 160 215 50 65
The MagFly® universal magnet is a real classic. It was the first adhesive magnet ever to be equipped with the patented MagFly® functionality, to which it ultimately owes not only its name but also its success. MagFly® universal magnets are versatile. Two threaded holes M16x1.5 are available as standard for mounting adapters and accessories. Alternative thread positions and sizes are available on request. The different adhesive forces, sizes and designs also ensure that the right holding magnet is available for different applications. MagFly® universal magnets can be used at ambient temperatures of up to 80°C. Special heat-resistant versions are available on request, e.g. for temperatures up to 120°C (type H) or 150°C (type SH). High-quality materials and the torsion-resistant design ensure an extremely long service life. Advantages at a glance Easy handling and exact positioning thanks to integrated MagFly® technology No additional tool required for loosening, the fixed eccentric lever is not only practical, it saves time Multifunctional use thanks to a wide range of accessories and adapters Scalable for a wide range of applications, as different sizes and adhesive forces are available depending on requirements High-quality materials and the torsion-resistant design ensure an extremely long service life Areas of application Multifunctional application possibilities through a wide range of accessories and adapters Suitable for tilt tables and steel pallets Compatible with Multiform and FlyFrame® formwork systems Integrated lever Technical properties of the magnet variants Article number Description Adhesive force (N) Weight (kg) l1 (mm) l2 (mm) b1 (mm) b2 (mm) h1 (mm) h2 (mm) 8001052 MagFly® 1000 k 11.000 5,0 230 270 60 115 50 65 8001055 MagFly® 1600 k 16.000 7,5 230 270 85 140 50 65 8001060 MagFly® 2000 k 22.000 10,0 230 270 110 165 50 65 8001064 MagFly® 2500 k 27.000 12,5 230 270 135 190 50 65 8001065 MagFly® 3000 k 33.000 15,0 230 270 160 215 50 65
The MagFly® AP is a patented shuttering magnet and part of the BT shuttering system. Its holding force to mass ratio is unique, as is the unique foot/spring system that allows the magnet to glide effortlessly over the formwork table. By applying firm pressure from above, the magnet is activated and adheres to the shuttering table through its magnetic force. With the integrated lever, the MagFly® AP can be easily and quickly released and realigned. The MagFly® AP does not require any additional tools or adapters to use it. The ultra-light aluminium housing enables ergonomic working with the magnet and protects the user's strength. In combination with the MultiForm formwork beam and an attached plastic triangular strip, the formwork beam and the triangular strip are pressed firmly onto the formwork table when the magnet is activated, so that subsequent sealing of the edge with silicone is simply not necessary. These effective technologies are perfectly matched to each other and thus considerably accelerate the production of precast concrete parts. You can watch the application of the MagFly® AP in the product video. Advantages Patented hold-down of the formwork, thus high contact pressure of the formwork on the formwork table No silicone necessary for sealing Easy and ergonomic handling due to foot/spring system Magnet perfectly matched to the formwork beam Unbeatable adhesion force to mass ratio Areas of application Shuttering magnet for pallet circulation systems as well as tilting tables Formwork for walls, columns etc. Technical data of the magnet variants Art.-Nr. Description Adhesive force [N] l1 [mm] l2 [mm] b1 [mm] b2 [mm] h1 [mm] h2 [mm] 8101067 MagFly® AP with lever right 22.000 260 407 96 124 65 96 8001075 MagFly® AP with lever left 22.000 260 407 96 124 65 96 8001081 MagFly® AP with lever °90 22.000 260 288 96 207 65 85
This is a replacement item for our MagFly® AP formwork magnets. These magnets are used to securely fix the MagFly® AP to our precast formwork MultiForm Type 1 & Type 2, MultiForm Alu, MultiForm Duo etc. Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Dowel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90°. Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Threaded pin (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Cylindrical grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
This is a replacement item for our MagFly® AP shuttering magnet. 4 of these compression springs are installed in each MagFly® AP shuttering magnet. When deactivating the magnet, these springs help to release the magnet from metal surfaces. Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Dowel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90°. Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Threaded pin (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Cylindrical grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
This is a replacement item for our MagFly® AP shuttering magnet. There are 4 feet installed per magnet.Technische Daten und Ersatzteile Art.-Nr. Product Info 8001067500 Lever joint 90° (lever front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Dowel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90°. Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Threaded pin (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Cylindrical grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
The MagFly® AP - foot block: precision and reliability for your shuttering magnets In the world of concrete construction, precision is crucial. Every production project requires the highest level of accuracy to achieve the desired results. This is where the MagFly® AP formwork magnet comes in, and where the MagFly® AP - foot block plays a central role. Why is the MagFly® AP - foot block important? The MagFly® AP - foot block is a crucial replacement and installation part for your MagFly® AP shuttering magnet. This innovative component not only ensures smooth operation of your shuttering magnet, but also significantly optimizes working efficiency during precast production. Features and advantages of the MagFly® AP - foot block Robust construction: The MagFly® AP - foot block is made of high-quality materials to ensure a long service life and resistance to the stresses in production facilities. Precise fit: This mounting part has been specially designed to fit seamlessly into your MagFly® AP Shuttering Magnet. This allows for easy assembly and installation. Improved stability: The foot block helps to increase the stability of your formwork magnet, which in turn increases the accuracy and efficiency of your concreting work. Easy to maintain: Thanks to its design, the MagFly® AP - foot block is easy to maintain, which saves time and costs. Trust in quality and innovation The MagFly® AP - foot block is more than just a spare part; it is an indispensable element to ensure that your MagFly® AP shuttering magnet performs at the highest level. With us, you can trust quality and innovation. Invest in the MagFly® AP - foot block and optimize your concreting projects. Rely on the proven performance and precision our products deliver. Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever in front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Cylinder pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Cylindrical pin (DIN 6325 - 10 x 30) Lever 90° Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Grub screw (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Cylindrical Grooved Pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Tension Bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot Block Spare part for MagFly® AP
This is a replacement item for our MagFly® AP shuttering magnet. The lever joint is available in 2 variants. Lever joint (standard version) - 8001067003 - in combination with straight pin (DIN 6325 - 10 x 40) - 8010396 Lever joint 90° (lever front) - 8001067500 - in combination with straight pin (DIN 6325 - 10 x 30) Lever 90° - 8010548 Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever in front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Parallel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90° Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Grub screw (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Parallel grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
This is a replacement item for our MagFly® AP shuttering magnet. The lever joint is available in 2 variants. Lever joint 90° (lever front) - 8001067500 - in combination with straight pin (DIN 6325 - 10 x 30) Lever 90° - 8010548 Lever joint (standard version) - 8001067003 - in combination with straight pin (DIN 6325 - 10 x 40) - 8010396 Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever in front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Parallel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90° Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Grub screw (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Parallel grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
This is a replacement item for our MagFly® AP shuttering magnet. The lever is available in 4 variants. Lever for MagFly® AP - short (Here we shorten the lever - straight. In combination with lever joint 90° - 8001067500 ) Lever for MagFly® AP - left (in combination with lever joint (standard version) - 8001067003) Lever for MagFly® AP - right (in combination with lever joint (standard version) - 8001067003) Lever for MagFly® AP - straight (in combination with lever joint 90° - 8001067500 or lever joint (standard version) - 8001067003) Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever in front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Parallel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90° Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Grub screw (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Parallel grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP
This is a replacement item for our MagFly® AP shuttering magnet. In combination with a lever, it is used to release the shuttering magnet from metal surfaces. Technical data and spare parts Art.-Nr. Product Info 8001067500 Lever joint 90° (lever front) Spare part for MagFly® AP 8001067003 Lever joint (standard version) Spare part for MagFly® AP 8001067001 Lever (right) - standard Spare part for MagFly® AP 8001081001 Lever (short) Spare part for MagFly® AP 8001075001 Lever (left) Spare part for MagFly® AP 8001067006 Lever (straight) Spare part for MagFly® AP 8010396 Dowel pin (DIN 6325 - 10 x 40) Spare part for MagFly® AP 8010548 Dowel pin (DIN 6325 - 10 x 30) Lever 90°. Spare part for MagFly® AP 8001067004 Plunger (D11) Spare part for MagFly® AP 8010397 Countersunk screw (ISO 10642 - M8 x 20) Spare part for MagFly® AP 8010399 Threaded pin (ISO 4027 - M6 x 8) Spare part for MagFly® AP 8010400 Countersunk screw (ISO 10642 - M8 x 30) Spare part for MagFly® AP 8010817 Compression spring (1.6 x 12 x 45.6) Spare part for MagFly® AP 8001067302 Foot Spare part for MagFly® AP 8010398 Cylindrical grooved pin (ISO 8740 - 5 x 30 - St) Spare part for MagFly® AP 8001067002 MagFly® AP - Clamping bolt (D=20 L=67mm) Spare part for MagFly® AP 8001067301 Foot block Spare part for MagFly® AP