Building specials - fastening technology - Product overview

Cast-in Channels Technical characteristics and variations of the Cast-in channels Art.-Nr. Article description Article information 3003240 Cast-in channel 28/15 L = 3050 mm, hot dip galvanised * - 3003084 Cast-in channel 38/17 L = 3050 mm, hot dip galvanised * - 3003129 Wall connection rail Durfest 45 Length = 1.25 m 5 m / bundle; 25 m / box * other versions on request NOTE: TRAPEZOIDAL MOUNTING RAILS ON REQUEST

Cast-in channel 38/17 - hot-dip galvanized Technical features and variations Art.-Nr. Article description Article information 3003240 Cast-in channel 28/15 L = 3050 mm, hot-dip galvanised * - 3003084 Cast-in channel 38/17 L = 3050 mm, hot-dip galvanised * - 3003129 Wall connection rail Durfest 45 Length = 1.25 m 5 m / Bundle; 25 m / Cardboard * other versions on request NOTE: TRAPEZOIDAL MOUNTING RAILS ON REQUEST

Rails Technical characteristics and variations of the rails Art.-Nr. Article description Article information 3003240 Anchor rail 28/15 L = 3050 mm, hot galvanized * - 3003084 Anchor rail 38/17 L = 3050 mm, hot galvanized * - 3003129 Wall connection rail Durfest 45 Length = 1,25 m 5 m / bundle; 25 m / box * other versions on request NOTE: TRAPEZOIDAL MOUNTING RAILS ON REQUEST

Rail accessories Sufficient for 5 m wall connection Anchors galvanized, for thin-bed mortar or bonded wall panels, e.g. with tongue and groove Due to staggered arrangement of the recesses, the anchors can be used at any height. Technical characteristics and variants of the rail accessories Art.-Nr. Article description Article information 3003222 Wall anchor 28/15 - length 150 mm, A2 * Thin bed mortar (100 pieces/box) 3004056 Wall connector MV 300/5 Stainless steel A4 - 1.4401 (250 piece / box) 3003128 Durfest wire anchor pack, galvanized each 12 dowels, screws, washers, 20 connection anchors /pack 3003127 Durfest flat anchor pack, galvanized - for thin-bed mortar each 12 dowels, screws, washers, 20 connection anchors / pack 1003102 Scaffold shoe 5/9 for plug-in assembly * made of steel color coated 4009053 Scaffolding sleeve 30 x 30 x 95 mm PE * - * other versions on request   NOTE: HAMMERHEAD SCREWS ON REQUEST

Technical properties and variants of the PHILIPP PB Anchor PBA 12 (12x77mm) - galvanised (incl. marking clip) These approved, heavy-duty internally threaded anchors in five different sizes (RD12-30) can be used wherever load-bearing structures are to be connected to prefabricated reinforced concrete elements or in-situ concrete elements. Whether in unreinforced and non-cracked normal concrete, the PB system transfers tensile and shear loads or a combination thereof safely and permanently. Various installation options (flush-mounted, recessed) and materials (galvanized or stainless steel version) allow for a wide range of applications. Advantages Permanent fasteners in sizes M12, M16, M20 and M24 Flexible formwork installation - recessed or flush with the surface Versatile, permanent fastening of all types of structures Simple, software-based dimensioning in accordance with DIN EN 1992 4:2019 04 Product details Free software for dimensioning PB anchors is available on the PHILIPP website with the following special features: ⁠galvanised version (insignificant corrosion load): dry interior rooms, e.g. living rooms, offices, schools, hospitals, etc. All important information at a glance Compact or complete, comprehensible dimensioning Basis DIN EN 1992-4:2019-04 Multiple dimensioning Areas of application of the PB anchor Balcony railings, stair railings Bridge railing Stadium seats Facade constructions Cable and supply line constructions Connection of steel / timber constructions to concrete

Technical properties and variants of the PHILIPP PB Anchor PBA 16 (16x115mm) - galvanised (incl. marking clip) These approved, heavy-duty internally threaded anchors in five different sizes (RD12-30) can be used wherever load-bearing structures are to be connected to prefabricated reinforced concrete elements or in-situ concrete elements. Whether in unreinforced and non-cracked normal concrete, the PB system transfers tensile and shear loads or a combination thereof safely and permanently. Various installation options (flush-mounted, recessed) and materials (galvanized or stainless steel version) allow for a wide range of applications. Advantages Permanent fasteners in sizes M12, M16, M20 and M24 Flexible formwork installation - recessed or flush with the surface Versatile, permanent fastening of all types of structures Simple, software-based dimensioning in accordance with DIN EN 1992 4:2019 04 Product details Free software for dimensioning PB anchors is available on the PHILIPP website with the following special features: ⁠galvanised version (insignificant corrosion load): dry interior rooms, e.g. living rooms, offices, schools, hospitals, etc. All important information at a glance Compact or complete, comprehensible dimensioning Basis DIN EN 1992-4:2019-04 Multiple dimensioning Areas of application of the PB anchor Balcony railings, stair railings Bridge railing Stadium seats Facade constructions Cable and supply line constructions Connection of steel / timber constructions to concrete

Technical properties and variants of the PHILIPP PB Anchor PBA 20 (20x155mm) - galvanised (incl. marking clip) These approved, heavy-duty internally threaded anchors in five different sizes (RD12-30) can be used wherever load-bearing structures are to be connected to prefabricated reinforced concrete elements or in-situ concrete elements. Whether in unreinforced and non-cracked normal concrete, the PB system transfers tensile and shear loads or a combination thereof safely and permanently. Various installation options (flush-mounted, recessed) and materials (galvanized or stainless steel version) allow for a wide range of applications. Advantages Permanent fasteners in sizes M12, M16, M20 and M24 Flexible formwork installation - recessed or flush with the surface Versatile, permanent fastening of all types of structures Simple, software-based dimensioning in accordance with DIN EN 1992 4:2019 04 Product details Free software for dimensioning PB anchors is available on the PHILIPP website with the following special features: ⁠galvanised version (insignificant corrosion load): dry interior rooms, e.g. living rooms, offices, schools, hospitals, etc. All important information at a glance Compact or complete, comprehensible dimensioning Basis DIN EN 1992-4:2019-04 Multiple dimensioning Areas of application of the PB anchor Balcony railings, stair railings Bridge railing Stadium seats Facade constructions Cable and supply line constructions Connection of steel / timber constructions to concrete

Technical properties and variants of the PHILIPP Threaded transport anchor The Threaded anchor short wavy tail is intended for use exclusively in slab-like elements. With the waveform and the ribbed reinforcing steel, modes of operation are combined in the concrete and thus enable shorter embedment depths. The load directions axial and diagonal tension are available without restrictions for this anchor type. Advantages no parts projecting above the element's surface resistant to light soiling due to special round thread small recesses on the concrete surface Recomended use Wall Bar-shaped element (e.g. purlin, waler, beam) Garage Floor and roofing slab Stair

Pigtail anchor DB 682 Technical characteristics and variants of the pigtail anchor DB 682 Art.-Nr. Product Description 3003163 Pigtail anchor DB 682 – M12 x 108 – gv with European Technical Assessment ETA-11/0288 3003067 Pigtail anchor DB 682 – M16 x 172 – gv with European Technical Assessment ETA-11/0288 3003064 Pigtail anchor DB 682 – M20 x 192 – gv with European Technical Assessment ETA-11/0288 3003331 Pigtail anchor DB 682 – M12 x 108 Stainless steel with European Technical Assessment ETA-11/0288 3003134 Pigtail anchor DB 682 – M16 x 172 Stainless steel with European Technical Assessment ETA-11/0288 3003184 Pigtail anchor DB 682 – M20 x 192 Stainless steel with European Technical Assessment ETA-11/0288

Pigtail anchor DB 682 Technical characteristics and variants of the pigtail anchor DB 682 Art.-Nr. Product Description 3003163 Pigtail anchor DB 682 – M12 x 108 – gv with European Technical Assessment ETA-11/0288 3003067 Pigtail anchor DB 682 – M16 x 172 – gv with European Technical Assessment ETA-11/0288 3003064 Pigtail anchor DB 682 – M20 x 192 – gv with European Technical Assessment ETA-11/0288 3003331 Pigtail anchor DB 682 – M12 x 108 Stainless steel with European Technical Assessment ETA-11/0288 3003134 Pigtail anchor DB 682 – M16 x 172 Stainless steel with European Technical Assessment ETA-11/0288 3003184 Pigtail anchor DB 682 – M20 x 192 Stainless steel with European Technical Assessment ETA-11/0288

Pigtail anchor DB 682 Technical characteristics and variants of the pigtail anchor DB 682 Art.-Nr. Product Description 3003163 Pigtail anchor DB 682 – M12 x 108 – gv with European Technical Assessment ETA-11/0288 3003067 Pigtail anchor DB 682 – M16 x 172 – gv with European Technical Assessment ETA-11/0288 3003064 Pigtail anchor DB 682 – M20 x 192 – gv with European Technical Assessment ETA-11/0288 3003331 Pigtail anchor DB 682 – M12 x 108 Stainless steel with European Technical Assessment ETA-11/0288 3003134 Pigtail anchor DB 682 – M16 x 172 Stainless steel with European Technical Assessment ETA-11/0288 3003184 Pigtail anchor DB 682 – M20 x 192 Stainless steel with European Technical Assessment ETA-11/0288

Pigtail anchor DB 682 Technical characteristics and variants of the pigtail anchor DB 682 Art.-Nr. Product Description 3003163 Pigtail anchor DB 682 – M12 x 108 – gv with European Technical Assessment ETA-11/0288 3003067 Pigtail anchor DB 682 – M16 x 172 – gv with European Technical Assessment ETA-11/0288 3003064 Pigtail anchor DB 682 – M20 x 192 – gv with European Technical Assessment ETA-11/0288 3003331 Pigtail anchor DB 682 – M12 x 108 Stainless steel with European Technical Assessment ETA-11/0288 3003134 Pigtail anchor DB 682 – M16 x 172 Stainless steel with European Technical Assessment ETA-11/0288 3003184 Pigtail anchor DB 682 – M20 x 192 Stainless steel with European Technical Assessment ETA-11/0288

Pigtail anchor DB 682 Technical characteristics and variants of the pigtail anchor DB 682 Art.-Nr. Product Description 3003163 Pigtail anchor DB 682 – M12 x 108 – gv with European Technical Assessment ETA-11/0288 3003067 Pigtail anchor DB 682 – M16 x 172 – gv with European Technical Assessment ETA-11/0288 3003064 Pigtail anchor DB 682 – M20 x 192 – gv with European Technical Assessment ETA-11/0288 3003331 Pigtail anchor DB 682 – M12 x 108 Stainless steel with European Technical Assessment ETA-11/0288 3003134 Pigtail anchor DB 682 – M16 x 172 Stainless steel with European Technical Assessment ETA-11/0288 3003184 Pigtail anchor DB 682 – M20 x 192 Stainless steel with European Technical Assessment ETA-11/0288

Rail accessories Technical characteristics and variants of the rail accessories Art.-Nr. Article description Article information 3003222 Wall anchor 28/15 - length 150 mm, A2 * Thin bed mortar (100 pieces/box) 3004056 Wall connector MV 300/5 Stainless steel A4 - 1.4401 (250 piece / box) 3003128 Durfest wire anchor pack, galvanized each 12 dowels, screws, washers, 20 connection anchors /pack 3003127 Durfest flat anchor pack, galvanized - for thin-bed mortar each 12 dowels, screws, washers, 20 connection anchors / pack 1003102 Scaffold shoe 5/9 for plug-in assembly * made of steel color coated 4009053 Scaffolding sleeve 30 x 30 x 95 mm PE * - * other versions on request   NOTE: HAMMERHEAD SCREWS ON REQUEST

Rail accessories suitable for scaffold shoe JG-H 5 Technical characteristics and variants of the rail accessories Art.-Nr. Article description Article information 3003222 Wall anchor 28/15 - length 150 mm, A2 * Thin bed mortar (100 pieces/box) 3004056 Wall connector MV 300/5 Stainless steel A4 - 1.4401 (250 piece / box) 3003128 Durfest wire anchor pack, galvanized each 12 dowels, screws, washers, 20 connection anchors /pack 3003127 Durfest flat anchor pack, galvanized - for thin-bed mortar each 12 dowels, screws, washers, 20 connection anchors / pack 1003102 Scaffold shoe 5/9 for plug-in assembly * made of steel color coated 4009053 Scaffolding sleeve 30 x 30 x 95 mm PE * - * other versions on request   NOTE: HAMMERHEAD SCREWS ON REQUEST

Rail accessories Technical characteristics and variants of the rail accessories Art.-Nr. Article description Article information 3003222 Wall anchor 28/15 - length 150 mm, A2 * Thin bed mortar (100 pieces/box) 3004056 Wall connector MV 300/5 Stainless steel A4 - 1.4401 (250 piece / box) 3003128 Durfest wire anchor pack, galvanized each 12 dowels, screws, washers, 20 connection anchors /pack 3003127 Durfest flat anchor pack, galvanized - for thin-bed mortar each 12 dowels, screws, washers, 20 connection anchors / pack 1003102 Scaffold shoe 5/9 for plug-in assembly * made of steel color coated 4009053 Scaffolding sleeve 30 x 30 x 95 mm PE * - * other versions on request   NOTE: HAMMERHEAD SCREWS ON REQUEST

Rail accessories Technical characteristics and variants of the rail accessories Art.-Nr. Article description Article information 3003222 Wall anchor 28/15 - length 150 mm, A2 * Thin bed mortar (100 pieces/box) 3004056 Wall connector MV 300/5 Stainless steel A4 - 1.4401 (250 piece / box) 3003128 Durfest wire anchor pack, galvanized each 12 dowels, screws, washers, 20 connection anchors /pack 3003127 Durfest flat anchor pack, galvanized - for thin-bed mortar each 12 dowels, screws, washers, 20 connection anchors / pack 1003102 Scaffold shoe 5/9 for plug-in assembly * made of steel color coated 4009053 Scaffolding sleeve 30 x 30 x 95 mm PE * - * other versions on request   NOTE: HAMMERHEAD SCREWS ON REQUEST