InnoElast® - Type 2 grey 600 ml - tubular bag
Product information "InnoElast® - Type 2 grey 600 ml - tubular bag"
InnoElast® Type 2
InnoElast® Type 2 is a 1-component, permanently elastic adhesive and sealant for highly stressed joints in the entire construction sector in accordance with DIN EN 15651-1. InnoElast® Type 2 adheres to many materials without primer and seals joints up to 4.80 m watertight under pressure.
Product features
- 1-component adhesive and sealant
- Good spraying properties
- No primer required
- Can also be applied to damp substrates Can be applied from -3°C on ice-free surfaces
- Solvent and isocyanate free
- Very high initial adhesion even in fresh condition
- Weather and UV resistant
- Compatible with paints
- High chemical resistance
- Can be combined with other Elast products (bitumen compatible)
Applications
- Adhesive and sealant for highly stressed joints in the entire construction sector (interior and exterior for concrete, wood and metal without primer).
- Permanently elastic sealant for facades and roofs according to DIN EN 15651 1.
- Waterproofing of basements and in civil engineering against pressing water, tested up to 4.80 m
- For repair and sealing of defects Adhesive for the ProElast® system
Article data & delivery form InnoElast® Type II
- 5004115 - black in 600 ml tubular bag
- 5004247 - grey in 600 ml tubular bag (on request)
- 5004258 - grey in 400 ml tubular bag (on request)
Surface preparation
Substrates must be solid and load-bearing and free from dust, grease, oils and other separating materials. The substrate must be damp, but not wet with a visible film. Suitable substrates are concrete and other mineral building materials as well as, among others, plasterboard, wood, metals, PVC, ceramics, bitumen, etc. In case of doubt, we recommend a preliminary test.
Processing
InnoElast® is applied directly using a squeeze gun. Priming is not necessary with suitable substrates. For joint sealing, ensure a sufficiently wide (≥5 mm) and sufficiently deep (≥ 10 mm and ≥ ½Width) joint formation. A 3-flank adhesion to the joint base is to be prevented by inserting a suitable joint filling cord or a strip of polyethylene. It is recommended to tape the joint edges with adhesive tape. The sealant must be applied to the joint without voids or bubbles. A good bond with the joint edges must be achieved by pressing and smoothing. Pure liquid soaps (not diluted with water), e.g. washing-up liquid, are suitable as smoothing agents. Remove the adhesive tape immediately after smoothing. The maximum sealant thickness in one work step should not exceed 5 cm. When used as an adhesive, InnoElast® is applied evenly to the bonding surface and spread with a notched trowel in a layer thickness of 1 to 2 mm. Ensure that the bond is free of cavities and bubbles by pressing on the entire surface. Large-surface bonding with InnoElast® requires a moisture-permeable substrate. For impermeable substrates, we recommend the use of FlächenElast® adhesive and sealant with artificial hardener. For tight bonding of the ProElast® sheet, please observe the processing instructions in the "ProElast® System" data sheet. In cases of doubt regarding substrate preparation and processing, we recommend a preliminary test.
Aftercare
Protect InnoElast® from moisture during the period of stable skin formation. For subsequent painting, we recommend carrying out your own tests due to the wide range of possible painting systems. InnoElast® Type 2 is compatible with paint according to DIN 52452 Part 4.
Videos
Login
- B.T. innovation GmbH | Sudenburger Wuhne 60 | 39116 Magdeburg | Deutschland
- Contact: info@bt-innovation.de
Downloads
- Abdichtungsguide.pdf
- BTi_Anwendungsanleitung_Abdichtung_InnoElast_DE_2021-07.pdf
- BTi_Technisches Datenblatt_InnoElast Typ2_D_2020-07.pdf
- BTi_Sicherheitsdatenblatt_InnoElast Typ2_DE_2019-05.pdf
- BTi_Leistungserklärung _InnoElast_Typ 2_DE_2014-12.pdf
- BTi_Prüfzeugnis_Allgemeines bauaufsichtliches Prüfzeugnis_InnoElast Typ 2_DE_2017-12.pdf
Dazu passt
Hand squeeze gun The professional hand squeeze gun is made of a sturdy aluminum-steel housing. The good workmanship ensures a reliable and even flow of material. Application instructions using the example of InnoElast® The substrate must be grease-free, clean and load-bearing. The substrate may be damp, an adhesive primer is usually not required. Apply backfill material (prevents 3- flank adhesion, saves material). Joints should be sufficiently thick or wide >10 mm, maximum width is 5 cm. InnoElast® is supplied in 600 ml tubular bags and is filled evenly into the joint using a tubular bag gun. Pull off the sealant smoothly and allow to cure. The curing time depends on the temperature and humidity. Attention!!! If release agents are used, they must not be water-based.
Important: From a size of 40mm diameter, 50x1m pieces are included per box! Please observe the notes on consumption: Joint width 5 mm 10 mm 15 mm 20 mm 30 mm 40 mm Joint depth 10 mm 10 mm 10 mm 10 mm 15 mm 20 mm Range of one hose bag 11,4 m 5,7 m 3,8 m 2,8 m 1,2 m 0,7 m Consumption of backfill cord (PE round cord) The backfill cord should be approx. 1,5 x as wide as the joint. Joint width 5-8 mm 8-12 mm 12-15 mm 15-18 mm 18-24 mm 24-30 mm 30-40 mm Diameter of PE cord 10 mm 15 mm 20 mm 25 mm 30 mm 40 mm 50 mm Product features and variants of the backfill cord Art.-Nr. Article description Article information 7009065 PE round cord 10 mm 100 m / Roll 7009066 PE round cord 15 mm 100 m / Roll 7009067 PE round cord 20 mm 50 m / Roll 7009069 PE round cord 30 mm 25 m / Roll 7009070 PE round cord 40 mm 50 m / Box (50x1m pieces) 7009071 PE round cord 50 mm 50 m / box (50x1m pieces)
Important: From a size of 40mm diameter, 50x1m pieces are included per box! Please observe the notes on consumption: Joint width 5 mm 10 mm 15 mm 20 mm 30 mm 40 mm Joint depth 10 mm 10 mm 10 mm 10 mm 15 mm 20 mm Range of one hose bag 11,4 m 5,7 m 3,8 m 2,8 m 1,2 m 0,7 m Consumption of backfill cord (PE round cord) The backfill cord should be approx. 1,5 x as wide as the joint. Joint width 5-8 mm 8-12 mm 12-15 mm 15-18 mm 18-24 mm 24-30 mm 30-40 mm Diameter of PE cord 10 mm 15 mm 20 mm 25 mm 30 mm 40 mm 50 mm Product features and variants of the backfill cord Art.-Nr. Article description Article information 7009065 PE round cord 10 mm 100 m / Roll 7009066 PE round cord 15 mm 100 m / Roll 7009067 PE round cord 20 mm 50 m / Roll 7009069 PE round cord 30 mm 25 m / Roll 7009070 PE round cord 40 mm 50 m / Box (50x1m pieces) 7009071 PE round cord 50 mm 50 m / box (50x1m pieces)
Content: 100 Meter
Important: From a size of 40mm diameter, 50x1m pieces are included per box! Please observe the notes on consumption: Joint width 5 mm 10 mm 15 mm 20 mm 30 mm 40 mm Joint depth 10 mm 10 mm 10 mm 10 mm 15 mm 20 mm Range of one hose bag 11,4 m 5,7 m 3,8 m 2,8 m 1,2 m 0,7 m Consumption of backfill cord (PE round cord) The backfill cord should be approx. 1,5 x as wide as the joint. Joint width 5-8 mm 8-12 mm 12-15 mm 15-18 mm 18-24 mm 24-30 mm 30-40 mm Diameter of PE cord 10 mm 15 mm 20 mm 25 mm 30 mm 40 mm 50 mm Product features and variants of the backfill cord Art.-Nr. Article description Article information 7009065 PE round cord 10 mm 100 m / Roll 7009066 PE round cord 15 mm 100 m / Roll 7009067 PE round cord 20 mm 50 m / Roll 7009069 PE round cord 30 mm 25 m / Roll 7009070 PE round cord 40 mm 50 m / Box (50x1m pieces) 7009071 PE round cord 50 mm 50 m / box (50x1m pieces)
Content: 25 Meter
Important: From a size of 40mm diameter, 50x1m pieces are included per box! Please observe the notes on consumption: Joint width 5 mm 10 mm 15 mm 20 mm 30 mm 40 mm Joint depth 10 mm 10 mm 10 mm 10 mm 15 mm 20 mm Range of one hose bag 11,4 m 5,7 m 3,8 m 2,8 m 1,2 m 0,7 m Consumption of backfill cord (PE round cord) The backfill cord should be approx. 1,5 x as wide as the joint. Joint width 5-8 mm 8-12 mm 12-15 mm 15-18 mm 18-24 mm 24-30 mm 30-40 mm Diameter of PE cord 10 mm 15 mm 20 mm 25 mm 30 mm 40 mm 50 mm Product features and variants of the backfill cord Art.-Nr. Article description Article information 7009065 PE round cord 10 mm 100 m / Roll 7009066 PE round cord 15 mm 100 m / Roll 7009067 PE round cord 20 mm 50 m / Roll 7009069 PE round cord 30 mm 25 m / Roll 7009070 PE round cord 40 mm 50 m / Box (50x1m pieces) 7009071 PE round cord 50 mm 50 m / box (50x1m pieces)
Content: 100 Meter
Important: From a size of 40mm diameter, 50x1m pieces are included per box! Please observe the notes on consumption: Joint width 5 mm 10 mm 15 mm 20 mm 30 mm 40 mm Joint depth 10 mm 10 mm 10 mm 10 mm 15 mm 20 mm Range of one hose bag 11,4 m 5,7 m 3,8 m 2,8 m 1,2 m 0,7 m Consumption of backfill cord (PE round cord) The backfill cord should be approx. 1,5 x as wide as the joint Joint width 5-8 mm 8-12 mm 12-15 mm 15-18 mm 18-24 mm 24-30 mm 30-40 mm Diameter of PE cord 10 mm 15 mm 20 mm 25 mm 30 mm 40 mm 50 mm Product features and variants of the backfill cord Art.-Nr. Article description Article information 7009065 PE round cord 10 mm 100 m / Roll 7009066 PE round cord 15 mm 100 m / Roll 7009067 PE round cord 20 mm 50 m / Roll 7009069 PE round cord 30 mm 25 m / Roll 7009070 PE round cord 40 mm 50 m / Box (50x1m pieces) 7009071 PE round cord 50 mm 50 m / box (50x1m pieces)
Content: 200 Meter
Important: From a size of 40mm diameter, 50x1m pieces are included per box! Please observe the notes on consumption: Joint width 5 mm 10 mm 15 mm 20 mm 30 mm 40 mm Joint depth 10 mm 10 mm 10 mm 10 mm 15 mm 20 mm Range of one hose bag 11,4 m 5,7 m 3,8 m 2,8 m 1,2 m 0,7 m Consumption of backfill cord (PE round cord) The backfill cord should be approx. 1,5 x as wide as the joint. Joint width 5-8 mm 8-12 mm 12-15 mm 15-18 mm 18-24 mm 24-30 mm 30-40 mm Diameter of PE cord 10 mm 15 mm 20 mm 25 mm 30 mm 40 mm 50 mm Product features and variants of the backfill cord Art.-Nr. Article description Article information 7009065 PE round cord 10 mm 100 m / Roll 7009066 PE round cord 15 mm 100 m / Roll 7009067 PE round cord 20 mm 50 m / Roll 7009069 PE round cord 30 mm 25 m / Roll 7009070 PE round cord 40 mm 50 m / Box (50x1m pieces) 7009071 PE round cord 50 mm 50 m / box (50x1m pieces)
Content: 50 Meter
Important: From a size of 40mm diameter, 50x1m pieces are included per box! Please observe the notes on consumption: Joint width 5 mm 10 mm 15 mm 20 mm 30 mm 40 mm Joint depth 10 mm 10 mm 10 mm 10 mm 15 mm 20 mm Range of one hose bag 11,4 m 5,7 m 3,8 m 2,8 m 1,2 m 0,7 m Consumption of backfill cord (PE round cord) The backfill cord should be approx. 1,5 x as wide as the joint. Joint width 5-8 mm 8-12 mm 12-15 mm 15-18 mm 18-24 mm 24-30 mm 30-40 mm Diameter of PE cord 10 mm 15 mm 20 mm 25 mm 30 mm 40 mm 50 mm Product features and variants of the backfill cord Art.-Nr. Article description Article information 7009065 PE round cord 10 mm 100 m / Roll 7009066 PE round cord 15 mm 100 m / Roll 7009067 PE round cord 20 mm 50 m / Roll 7009069 PE round cord 30 mm 25 m / Roll 7009070 PE round cord 40 mm 50 m / Box (50x1m pieces) 7009071 PE round cord 50 mm 50 m / box (50x1m pieces)