MultiForm Type 1 - Formwork angle H 690

The MagFly® AP is a patented shuttering magnet and part of the BT shuttering system. Its holding force to mass ratio is unique, as is the unique foot/spring system that allows the magnet to glide effortlessly over the formwork table. By applying firm pressure from above, the magnet is activated and adheres to the shuttering table through its magnetic force. With the integrated lever, the MagFly® AP can be easily and quickly released and realigned. The MagFly® AP does not require any additional tools or adapters to use it. The ultra-light aluminium housing enables ergonomic working with the magnet and protects the user's strength. In combination with the MultiForm formwork beam and an attached plastic triangular strip, the formwork beam and the triangular strip are pressed firmly onto the formwork table when the magnet is activated, so that subsequent sealing of the edge with silicone is simply not necessary. These effective technologies are perfectly matched to each other and thus considerably accelerate the production of precast concrete parts. You can watch the application of the MagFly® AP in the product video. Advantages Patented hold-down of the formwork, thus high contact pressure of the formwork on the formwork table No silicone necessary for sealing Easy and ergonomic handling due to foot/spring system Magnet perfectly matched to the formwork beam Unbeatable adhesion force to mass ratio Areas of application Shuttering magnet for pallet circulation systems as well as tilting tables Formwork for walls, columns etc. Technical data of the magnet variants Art.-Nr. Description Adhesive force [N] l1 [mm] l2 [mm] b1 [mm] b2 [mm] h1 [mm] h2 [mm] 8101067 MagFly® AP with lever right 22.000 260 407 96 124 65 96 8001075 MagFly® AP with lever left 22.000 260 407 96 124 65 96 8001081 MagFly® AP with lever °90 22.000 260 288 96 207 65 85

The MagFly® AP is a patented shuttering magnet and part of the BT shuttering system. Its holding force to mass ratio is unique, as is the unique foot/spring system that allows the magnet to glide effortlessly over the formwork table. By applying firm pressure from above, the magnet is activated and adheres to the shuttering table through its magnetic force. With the integrated lever, the MagFly® AP can be easily and quickly released and realigned. The MagFly® AP does not require any additional tools or adapters to use it. The ultra-light aluminium housing enables ergonomic working with the magnet and protects the user's strength. In combination with the MultiForm formwork beam and an attached plastic triangular strip, the formwork beam and the triangular strip are pressed firmly onto the formwork table when the magnet is activated, so that subsequent sealing of the edge with silicone is simply not necessary. These effective technologies are perfectly matched to each other and thus considerably accelerate the production of precast concrete parts. You can watch the application of the MagFly® AP in the product video. Advantages Patented hold-down of the formwork, thus high contact pressure of the formwork on the formwork table No silicone necessary for sealing Easy and ergonomic handling due to foot/spring system Magnet perfectly matched to the formwork beam Unbeatable adhesion force to mass ratio Areas of application Shuttering magnet for pallet circulation systems as well as tilting tables Formwork for walls, columns etc. Technical data of the magnet variants Art.-Nr. Description Adhesive force [N] l1 [mm] l2 [mm] b1 [mm] b2 [mm] h1 [mm] h2 [mm] 8101067 MagFly® AP with lever right 22.000 260 407 96 124 65 96 8001075 MagFly® AP with lever left 22.000 260 407 96 124 65 96 8001081 MagFly® AP with lever °90 22.000 260 288 96 207 65 85

The MagFly® universal magnet is a real classic. It was the first adhesive magnet ever to be equipped with the patented MagFly® functionality, to which it ultimately owes not only its name but also its success. MagFly® universal magnets are versatile. Two threaded holes M16x1.5 are available as standard for mounting adapters and accessories. Alternative thread positions and sizes are available on request. The different adhesive forces, sizes and designs also ensure that the right holding magnet is available for different applications. MagFly® universal magnets can be used at ambient temperatures of up to 80°C. Special heat-resistant versions are available on request, e.g. for temperatures up to 120°C (type H) or 150°C (type SH). High-quality materials and the torsion-resistant design ensure an extremely long service life. Advantages at a glance Easy handling and exact positioning thanks to integrated MagFly® technology No additional tool required for loosening, the fixed eccentric lever is not only practical, it saves time Multifunctional use thanks to a wide range of accessories and adapters Scalable for a wide range of applications, as different sizes and adhesive forces are available depending on requirements High-quality materials and the torsion-resistant design ensure an extremely long service life Areas of application Multifunctional application possibilities through a wide range of accessories and adapters Suitable for tilt tables and steel pallets Compatible with Multiform and FlyFrame® formwork systems Integrated lever Technical properties of the magnet variants Article number Description Adhesive force (N) Weight (kg) l1 (mm) l2 (mm) b1 (mm) b2 (mm) h1 (mm) h2 (mm) 8001052 MagFly® 1000 k 11.000 5,0 230 270 60 115 50 65 8001055 MagFly® 1600 k 16.000 7,5 230 270 85 140 50 65 8001060 MagFly® 2000 k 22.000 10,0 230 270 110 165 50 65 8001064 MagFly® 2500 k 27.000 12,5 230 270 135 190 50 65 8001065 MagFly® 3000 k 33.000 15,0 230 270 160 215 50 65

High-quality, fully galvanised adapter made of 6mm sheet steel, with handle. Suspension made of drawn round steel ø20mm including 1 piece of rubber washer and 2 pieces of screws with toothed washers Dimensions: Length: 310 mm incl.suspension Width: 115 mm Height: 45 mm with handle Multiform is a robust and flexible formwork system for the production of a wide variety of precast elements. With the MagFly® magnets, Multiform can be easily moved on the formwork table and precisely positioned. Since the MagFly® AP presses the Multiform onto the shuttering table, when a PE triangular strip is used on the shuttering board, the joint is immediately sealed when the magnet is activated. This eliminates the need for subsequent sealing with silicone. Matching MultiForm, the window and door recess offers a clever solution for enclosed openings in the concrete part. With elements that can be dismantled inwards, the formwork can be stripped non-destructively and thus re-used. The integrated receptacle for the MagFly® magnets enables fast and precise assembly and disassembly of the formwork. Areas of application Production of solid and sandwich walls Manufacture of platform slabs, supports and beams Use on tilt tables, indexing tables, circulation pallets and wooden surfaces Advantages Quick and ergonomic application No sealing with silicone between formwork skin and switch table Stable and robust system for use in the precast plant The window and door recess can be dismantled inwards Technical features and variation of MultiForm accessories Art.-Nr. Product Description 8101157 MultiForm shuttering system MFE 98 Dimensions: 408 x 98 8101243 MultiForm shuttering system MFE 148 Dimensions: 408 x 148 8101142 MultiForm shuttering system MFE 198 Dimensions: 408 x 198 8101253 MultiForm shuttering system MFE 248 Dimensions: 408 x 248 8101278 MultiForm shuttering system MFE 298 Dimensions: 408 x 298 8101224 MultiForm shuttering system MFE 348 Dimensions: 408 x 348 8101244 MultiForm shuttering system MFE 398 Dimensions: 408 x 398 8101472 MultiForm shuttering system MFE 498 Dimensions: 408 x 498 8101443 MultiForm shuttering system MFE 148/728 Inside corner Dimensions: 607/550 x 148 8101213 MultiForm shuttering system MFE 198/728 Inside corner Dimensions: 607/550 x 198 8008053 MultiForm clamp For formwork heights from 500 mm 8008072 MultiForm adapter For shuttering made of wood 8008062 MultiForm connecting element - 8008063 MultiForm intermediate piece for connecting element - 8101293 MultiForm shelving system one-sided - 8101294 MultiForm shelving system on one side on hand platform trolley - 8008148 MultiForm - Adapter, Version: h * suitable for MF1 and MF 2; for MagFly® 1600